Mcpx Questions

Discussion in 'Blade Heli's' started by Mark Mickels, May 11, 2014.

By Mark Mickels on May 11, 2014 at 12:25 AM
  1. Mark Mickels

    Mark Mickels Well-Known Member

    Joined:
    Apr 26, 2014
    Messages:
    305
    Likes Received:
    262
    Is there any trick for getting the screws started in the feathering shaft? I spent over an hour yesterday trying to do this. The screws are microscopic and hard for me to see. Also, I put some Lynx blades on and they appear to be slightly longer than the stock blades. Will I have tail issues while using the new blades? TIA for any help.
     
    Mark Mickels, May 11, 2014
    #1

Comments

Discussion in 'Blade Heli's' started by Mark Mickels, May 11, 2014.

    1. Geena

      Geena Well-Known Member

      Joined:
      Apr 1, 2014
      Messages:
      936
      Likes Received:
      1,183
      I generally dab a very tiny amount of CA on the screw driver, and then put the screw on the driver. It holds the screw in place long enough to start it in the end of the shaft. It works well for me, so you might give that a try. Hope this helps. :)

      Can`t help with the blades, because I still have the stock ones on mine. :)
       
      Geena, May 11, 2014
      #2
    2. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      I also have a magnitizer/de-magnitiser that helps keep it in... also hold the screw vertically and still and move the mcpx to it ...

      Citizen#024
       
      Manyc, May 11, 2014
      #3
    3. Mark Mickels

      Mark Mickels Well-Known Member

      Joined:
      Apr 26, 2014
      Messages:
      305
      Likes Received:
      262
      I think I have a demagnetizer somewhere. Thanks for the suggestions. I'll let you know how it fares with the upgraded blades.
       
      Mark Mickels, May 12, 2014
      #4
    4. Mark Mickels

      Mark Mickels Well-Known Member

      Joined:
      Apr 26, 2014
      Messages:
      305
      Likes Received:
      262
      Well, I went to the Lagoon FF today and it was blowing a gale. Didn't even try to put anything up in the air. Freaking wind!
       
      Mark Mickels, May 12, 2014
      #5

Share This Page

test

    About Us

    Just like you, Heligods staff are regular everyday fliers. Join our forum and participate in what will become the worlds greatest rc helicopter forum..

    Credits:

    A big thank you to the following people who helped us put together this site:

    Pope Francis

    Deli Lama

    George Bush

    Gene Simmons (aka Crash)